| | Cad Rendering of project Jeep J-5500 ! |  |
|
|
| Author | Message |
|---|
$/$-AMX
Valued Member
Posts: 125
Age: 31
Location: Madison, WI.
| | Subject: Cad Rendering of project Jeep J-5500 ! January 15th 2010, 9:40 pm | |
| First draft CAD Rendering Jeep-J-5500:  projected build joining a 1989-93' RAM350 DRW 4WD Diesel with a 1962-88' Jeep J-truck. power train: 12V-5.9L, 5spd-OD, 4.56 gears, 245/70R19.5 tires. This is the replacement for my 6.5er . . . Mike |
|
| | |
merlin5577
Admin
Posts: 2938
Age: 26
Location: Taunton, MA
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 15th 2010, 9:42 pm | |
| NOICE!!!!!!!!! Me likey! ================================================ -Robert.
My Fleet;2011 Volkswagen Jetta TDI 2.0L 6A
2010 Chevrolet Malibu LT 2.4L 6A
2003 Chevrolet Silverado LS 6.6L 5A
1997 GMC Suburban SLT 5.7L 4A"If you dont stand behind our troops, feel free to stand in front of them."  |
|
| | |
$/$-AMX
Valued Member
Posts: 125
Age: 31
Location: Madison, WI.
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 16th 2010, 6:53 pm | |
| Why thank you my good man. that is the build which created the axle post. . .
Mike |
|
| | |
merlin5577
Admin
Posts: 2938
Age: 26
Location: Taunton, MA
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 16th 2010, 7:10 pm | |
| What are your plans for the interior? And the exhaust? ================================================ -Robert.
My Fleet;2011 Volkswagen Jetta TDI 2.0L 6A
2010 Chevrolet Malibu LT 2.4L 6A
2003 Chevrolet Silverado LS 6.6L 5A
1997 GMC Suburban SLT 5.7L 4A"If you dont stand behind our troops, feel free to stand in front of them." |
|
| | |
$/$-AMX
Valued Member
Posts: 125
Age: 31
Location: Madison, WI.
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 16th 2010, 10:00 pm | |
| Bucket seat's / center counsel / Over display some thing to this effect . . .
Full set gauges:
Speedo.
Tach.
Fuel level.
Oil pressure.
Volts.
Oil temperature.
Boost.
Water temperature.
Pyro.
Main goal get it tear it apart and get it right back on the road.
adding the goodies as needed . . . some before some during some after . . .
Mike |
|
| | |
merlin5577
Admin
Posts: 2938
Age: 26
Location: Taunton, MA
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 16th 2010, 10:10 pm | |
| And the exhaust? Stacks maybe? ================================================ -Robert.
My Fleet;2011 Volkswagen Jetta TDI 2.0L 6A
2010 Chevrolet Malibu LT 2.4L 6A
2003 Chevrolet Silverado LS 6.6L 5A
1997 GMC Suburban SLT 5.7L 4A"If you dont stand behind our troops, feel free to stand in front of them." |
|
| | |
$/$-AMX
Valued Member
Posts: 125
Age: 31
Location: Madison, WI.
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 16th 2010, 10:26 pm | |
|  I'm going without straight open manifold it'll get duel stack's or straight piped single exhaust under truck. . . Mike |
|
| | |
semocoachworks
Valued Member
Posts: 153
Age: 37
Location: rapid city south dakota
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 17th 2010, 12:31 am | |
| That will be a cool ride. I always like the j series pickups. |
|
| | |
$/$-AMX
Valued Member
Posts: 125
Age: 31
Location: Madison, WI.
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 17th 2010, 1:49 pm | |
| Rendering #2:  Red paint and 19.5's . .. Mike |
|
| | |
Jared Olson for SO IL
Valued Member
Posts: 376
Age: 18
Location: Campbell Hill, IL
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 17th 2010, 2:05 pm | |
| |
|
| | |
merlin5577
Admin
Posts: 2938
Age: 26
Location: Taunton, MA
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 17th 2010, 2:14 pm | |
| The wheels on the first one, with the paint job of the second one, very nice! ================================================ -Robert.
My Fleet;2011 Volkswagen Jetta TDI 2.0L 6A
2010 Chevrolet Malibu LT 2.4L 6A
2003 Chevrolet Silverado LS 6.6L 5A
1997 GMC Suburban SLT 5.7L 4A"If you dont stand behind our troops, feel free to stand in front of them." |
|
| | |
$/$-AMX
Valued Member
Posts: 125
Age: 31
Location: Madison, WI.
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 17th 2010, 2:44 pm | |
| the first one wheel are just Hub cap's  . . . and are 16's these are 19.5's  just wait till the truck's built . . .more surprises are to come . . .  Mike |
|
| | |
FaselZ71
Almost Addicted Member
Posts: 1087
Age: 24
Location: Northern Lower Michigan
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 17th 2010, 4:07 pm | |
| Sounds like a fantastic plan however the pics are just little red X's on my computer so I'm the only one still in the dark!! lol |
|
| | |
$/$-AMX
Valued Member
Posts: 125
Age: 31
Location: Madison, WI.
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 17th 2010, 7:07 pm | |
| Say merrlin ? by chance you'd know how to fix his RED X's
Mike |
|
| | |
merlin5577
Admin
Posts: 2938
Age: 26
Location: Taunton, MA
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 17th 2010, 7:10 pm | |
| The picture is working as it should, the problem has to be with Fasels computer or internet connection. ================================================ -Robert.
My Fleet;2011 Volkswagen Jetta TDI 2.0L 6A
2010 Chevrolet Malibu LT 2.4L 6A
2003 Chevrolet Silverado LS 6.6L 5A
1997 GMC Suburban SLT 5.7L 4A"If you dont stand behind our troops, feel free to stand in front of them." |
|
| | |
$/$-AMX
Valued Member
Posts: 125
Age: 31
Location: Madison, WI.
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 18th 2010, 2:04 am | |
| Well thats crappy. . .
Mike |
|
| | |
FaselZ71
Almost Addicted Member
Posts: 1087
Age: 24
Location: Northern Lower Michigan
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 19th 2010, 11:33 am | |
| Well the first picture is working today but not the second one so it's my computer I'll try to figure it out I'm using a brand new laptop so it's probably a bug I've got to work out... The first rendering looks good though can't wait to see the second one!! |
|
| | |
FaselZ71
Almost Addicted Member
Posts: 1087
Age: 24
Location: Northern Lower Michigan
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 19th 2010, 11:36 am | |
| Ok so I got it figured out I like the rims on the second photo but the body of the first!! I can't stand red!! |
|
| | |
$/$-AMX
Valued Member
Posts: 125
Age: 31
Location: Madison, WI.
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 23rd 2010, 8:07 pm | |
| Update !J-5500:  Mike |
|
| | |
batty1214
Valued Member
Posts: 448
Age: 27
Location: Utah
| | Subject: Re: Cad Rendering of project Jeep J-5500 ! January 23rd 2010, 8:49 pm | |
| ought to look into http://www.southwestwheel.com/alcoadodgeram3500.htm.... they have a series 058 and 097 series dual rims.... they look really nice... |
|
| | |
| | Cad Rendering of project Jeep J-5500 ! | |
|
