| | head gasket |  |
|
|
| Author | Message |
|---|
f150dailydragger
Valued Member
Posts : 139
Age : 39
Location : Lindenwold NJ
|  Subject: head gasket September 17th 2009, 8:24 am | |
| what should i do or use to remove all the foamy stuff out of the motor after replacing the head gaskets? | |
|
| | |
merlin5577
Admin
Posts : 2938
Age : 39
Location : Taunton, MA
| | Subject: Re: head gasket September 17th 2009, 12:24 pm | |
| Foamy stuff? The butterscotch stuff from the oil and coolant mixing? | |
|
| | |
f150dailydragger
Valued Member
Posts : 139
Age : 39
Location : Lindenwold NJ
| | Subject: Re: head gasket September 17th 2009, 1:50 pm | |
| yea it foams up after mixing. | |
|
| | |
merlin5577
Admin
Posts : 2938
Age : 39
Location : Taunton, MA
| | Subject: Re: head gasket September 17th 2009, 3:14 pm | |
| Get a can of b-12 Chemtool and add it to the oil, run the engine for no more then 1 minute then drain the oil. Refill with new oil/filter, then flush the coolant and voila! | |
|
| | |
FaselZ71
Almost Addicted Member
Posts : 1087
Age : 37
Location : Northern Lower Michigan
| | Subject: Re: head gasket September 17th 2009, 6:31 pm | |
| umm... I never changed the oil in the wifes mitsi after changing the head gasket. I wonder if that messed anything up it's almost due for a change anyway! | |
|
| | |
1993GMCSierra
Hyperactive Member
Posts : 830
Age : 32
Location : Surry, VA
| | Subject: Re: head gasket September 17th 2009, 11:14 pm | |
| I just changed the oil in the truck after, then after 100 miles, and was done with it. | |
|
| | |
f150dailydragger
Valued Member
Posts : 139
Age : 39
Location : Lindenwold NJ
| | Subject: Re: head gasket September 18th 2009, 7:59 am | |
| | |
|
| | |
merlin5577
Admin
Posts : 2938
Age : 39
Location : Taunton, MA
| | Subject: Re: head gasket September 19th 2009, 7:44 pm | |
| So what did you end up doing? | |
|
| | |
f150dailydragger
Valued Member
Posts : 139
Age : 39
Location : Lindenwold NJ
| | Subject: Re: head gasket September 19th 2009, 8:58 pm | |
| this is on my buddies truck and we drained it after we repaced the gaskets, put fresh oil in ran it for about 20 min in the driveway, shut it and off drained it hot . then we put fresh in it and he is going to run it about a hundred miles and change it. we have checked it several times since we took it for the first ride this morning, and its looking good so far. he will have a hundred miles on it by monday. thanks for the help. | |
|
| | |
merlin5577
Admin
Posts : 2938
Age : 39
Location : Taunton, MA
| | Subject: Re: head gasket September 20th 2009, 9:48 pm | |
| Glad to hear it was a successful repair. | |
|
| | |
Sponsored content
| | Subject: Re: head gasket | |
| |
|
| | |
| | head gasket | |
|
